The cost of installing new shingles on a 2000 square foot house varies widely, depending on the type of shingles used and the complexity of the roof. Asphalt shingles are the most common and cost-effective option, but other materials can be more expensive. The average size of residential roofs in the U. S.
is around 1,700 square feet, but larger houses can have roofs that exceed 2000 square feet. It's important to note that a higher price doesn't always mean better quality, especially if the contractor you hire uses subcontractors to do the actual work. It's also important to make sure that any installation is done in a way that doesn't void the shingle manufacturer's warranty. For a 1,400 square foot house, the roof size is likely to range between 1,600 and 1,800 square feet.
The price per square foot can be higher when a roof has complex features such as side walls, multiple chimneys, skylights or attics. It's also important to consider whether the contractor will install new plywood after removing the old cedar slats. Some wooden shaking ceilings have a dashboard covering, which means there are spaces on the roof terrace, so it's important to make sure this is taken into account when getting a quote. A 30-square reroofing job has many advantages for the installer doing the job.
Step covers and any other previous covers should only be reused if they are in good condition and there is no damage to the roof cover. Old fences with drip edges and gables are often damaged when removing the old roof, so it's best to install new covers and completely repair the roof cover as needed during a roofing job. In terms of prices during this pandemic, it's best to shop around for quotes from different contractors and compare them carefully. It's also important to consider what options are available if the house is likely to be demolished in 10 or 15 years' time.
It's also worth noting that the actual roof area is always greater than the square footage of the house's floor plan, because there are often two-foot overhangs on each side of the roof, in addition to the roof slope to take into account. Some roofs may also have peaks, attics and valleys that can add square footage to the roof topology. When getting quotes for a new roof installation, it's important to know both the area of the roof and the amount of work involved (level of difficulty, number of attics and valleys, number of layers of old tiles to remove etc.). 100 square feet is equal to one square (or one 'square').
Home Depot has a large profit margin on its home services, while contractors who ultimately install the roof are paid a fixed amount per square foot. It's important to make sure that any contractor you hire has workers' compensation insurance and follows safety standards during installation. Finally, it's worth considering whether synthetic slate roofs are an option for your home as they can be just as quick and easy (or even easier) to install than asphalt shingle roofs. Synthetic slate roofs can also provide better protection against wind rise than 3-tab tiles.